Sapphire's Radeon HD 7990 Atomic made its first appearance at Computex, early last month. While launch of the card itself is less than a few weeks away, pictures of its PCB and cooling solution made it to the web. Its PCB, pictured below, features a pair of 28 nm "Tahiti XT2" GPUs, a total of 6 GB of GDDR5 memory, and a PLX PEX8747 PCI-Express gen 3.0 x48 bridge chip, powered by a gargantuan 18-phase VRM that draws power from three 8-pin PCI-Express power connectors.
Each GPU system hence gets a 6+2+1 phase power supply (Vcc+VDDCI+MVDD). The Vcc phases appear to consist of two 50A chokes per phase, and driver-MOSFETs; while the ancillary phases use more conventional LFPAK MOSFETs. Tantalum capacitors handle most electricals on this 12-layer PCB. The PCB features two sets of video BIOS for each GPU. Display outputs include six mini-DisplayPort connectors. The card can pair with any other Radeon HD 7900 series card using CrossFireX.
http://www.techpowerup.com/187162/sapphire-radeon-hd-7990-atomic-pcb-and-cooling-solution-pictured.html
Each GPU system hence gets a 6+2+1 phase power supply (Vcc+VDDCI+MVDD). The Vcc phases appear to consist of two 50A chokes per phase, and driver-MOSFETs; while the ancillary phases use more conventional LFPAK MOSFETs. Tantalum capacitors handle most electricals on this 12-layer PCB. The PCB features two sets of video BIOS for each GPU. Display outputs include six mini-DisplayPort connectors. The card can pair with any other Radeon HD 7900 series card using CrossFireX.
http://www.techpowerup.com/187162/sapphire-radeon-hd-7990-atomic-pcb-and-cooling-solution-pictured.html
Комментариев нет:
Отправить комментарий